FFT动态相位重建算法的滤波窗影响分析

为了优化相位重建算法，针对波面干涉图的傅里叶频谱，分析了不同滤波窗口的分布特征和频谱响应，通过计算机仿真和实验测试，确定了FFT动态相位重建算法的最佳滤波窗口类型。其中处理仿真干涉图重建的波面与原始波面的波面峰谷值残差为0.008 5λ，波面均方根值残差为0.000 1λ；处理实验干涉图获得的波面与移相干涉测量法获得的波面峰谷值残差为0.009 3λ，波面均方根值残差为0.000 5λ。结果表明:选取Hamming窗进行滤波处理并重建的相位经拟合后得到的波面较参考波面的面形残差最小，相位重建精度优于0.01λ，可进一步应用于大口径光学元件的测量中。     

Crystalline Divinyldiarsenes and Cleavage of the As=As Bond

The first divinyldiarsenes [{(NHC)C(Ph)}As]₂ (NHC=IPr 3 a , SIPr 3 b ; IPr=C{(NAr)CH}₂; SIPr=C{(NAr)CH₂}₂; Ar=2,6-iPr₂C₆H₃) are reported. Compounds 3 a and 3 b were prepared by the reduction of corresponding chlorides {(NHC)C(Ph)}AsCl₂ (NHC=IPr 2 a , SIPr 2 b ) with Mg. Calculations revealed a small HOMO–LUMO energy gap of 3.86 ( 3 a ) and 4.24 eV ( 3 b ). Treatment of 3 a with (Me₂S)AuCl led to the cleavage of the As=As bond to restore 2 a , which is expected to proceed via the diarsane [{(IPr)C(Ph)}AsCl]₂ ( 4 ). Remarkably, 4 as well as 2 a can be selectively accessed on treatment of 3 a with an appropriate amount of C₂Cl₆. Moreover, 3 a readily reacts with PhEEPh (E=Se or Te) at room temperature to give {(IPr)C(Ph)}As(EPh)₂ (E=Se 5 a ; Te 5 b ), revealing the cleavage of As=As and E−E bonds and the formation of As−E bonds. Such highly selective stepwise oxidation ( 3 a → 4 → 2 a ) and bond metathesis ( 3 a → 5 a , b ) reactions are unprecedented in main-group chemistry.     

Coordinating Ability of Anions,Solvents, Amino Acids,and Gases towards Alkaline and Alkaline-Earth Elements,Transition Metals,and Lanthanides

After briefly reviewing the applications of the coordination ability indices proposed earlier for anions and solvents toward transition metals and lanthanides, a new analysis of crystal structures is applied now to a much larger number of coordinating species: anions (including those that are present in ionic solvents), solvents, amino acids, gases, and a sample of neutral ligands. The coordinating ability towards s-block elements is now also considered. The effect of several factors on the coordinating ability will be discussed: (a) the charge of an anion, (b) the chelating nature of anions and solvents, (c) the degree of protonation of oxo-anions, carboxylates and amino carboxylates, and (d) the substitution of hydrogen atoms by methyl groups in NH₃, ethylenediamine, benzene, ethylene, pyridine and aldehydes. Hit parades of solvents and anions most commonly used in the areas of transition metal, s-block and lanthanide chemistry are deduced from the statistics of their presence in crystal structures.     

Noble metal nanoparticles functionalized by natural asphaltenes as model phases for geochemical research

1. Download : Download high-res image (212KB)
2. Download : Download full-size image

     

Real Brauer characters

In this paper, we determine the structure of finite groups with a small number of real-valued irreducible Brauer characters.     

Effect of transition elements on dispersoid formation and elevated-temperature mechanical properties in 6082 aluminum alloy

ABSTRACT

The effect of transition elements, specifically Mn, Cr, V, and Mo, on dispersoid formation and mechanical properties in 6082 aluminum alloy was studied. The elevated-temperature mechanical properties were evaluated based on the compressive yield strength and creep resistance. The results indicated that the addition of Mn to the 6082 alloy resulted in the formation of a large number of the thermally stable α-Al(MnFe)Si dispersoids, thereby significantly improving the elevated-temperature mechanical properties of the alloy. Subsequent additions of Cr, V, and Mo increased the amount of Mn-bearing intermetallic phases, which decreased the supersaturation levels of Mn and Si in the α-Al, and consequently decreased the volume fraction of the dispersoids. The alloys containing Cr, V, and Mo exhibited similar yield strengths at 300°C and higher yield strengths at room temperature compared to the alloy containing only Mn. The size effect of the smaller dispersoids containing Cr, V, and Mo together with the solid-solution hardening of these elements could balance out the strength decrease resulting from the decreased volume fraction of the dispersoids. The additions of Cr, V, and Mo significantly increased the creep resistance of the Mn-containing 6082 alloy. Vanadium induced the highest creep resistance followed by Cr and Mo. Solute atoms of these elements with low diffusivity in the aluminum matrix contributed significantly to increasing the creep resistance at 300°C.     

Behavior and process of background signal formation of hydrogen,carbon, nitrogen,and oxygen in silicon wafers during depth profiling using dual-beam TOF-SIMS

The behavior and mechanism of background signals during depth profiling of atmospheric elements using dual-beam time-of-flight secondary ion mass spectrometry (TOF-SIMS) have been experimentally investigated for silicon wafers. The background signals of atmospheric elements were found to be inversely proportional to the sputtering rate. Most of the background signals are largely attributable to the accumulation of components through adsorption and ion bombardment in the pre-equilibrium state. On the other hand, the contribution of real-time adsorption during the instant after the last sputtering in the equilibrium state is negligible under the present experimental conditions. H₂O is dominant in the background formation process of hydrogen and oxygen, which is supported by the higher adsorption coefficients. The background levels of carbon and nitrogen are lower than those of hydrogen and oxygen. Furthermore, the background signal of carbon with respect to the sputtering rate shows a different trend than the other elements. This could be attributed to accumulation in the pre-equilibrium state. These results indicate that the background levels can be lowered close to those of dynamic-SIMS by using an extremely high sputtering rate in dual-beam TOF-SIMS.     

Determination of lanthanum and cerium in cmsx-4 nickel-based superalloys by inductively coupled plasma mass spectrometryEI北大核心CSCD

CMSX-4 is the second-generation nickel-based single crystal superalloy used widely in the world. The oxidation resistance and corrosion resistance of CMSX-4 alloy can be improved by adding trace lanthanum (La), cerium (Ce) and other rare earth elements. A method for the simultaneous determination of La and Ce in CMSX-4 nickel-based superalloy by wet dissolution-inductively coupled plasma mass spectrometry was established. The sample was heated and dissolved under normal pressure by aqua regia and hydrofluoric acid, and the interference of fluorine ion was eliminated by using perchloric acid. The amount of dissolved acid and the digestion conditions were optimized. The limits of detection were 0.23 μg/g for La and 0.85 μg/g for Ce under optimized conditions. The spiked recoveries were 95.0%–98.9% with the relative standard deviations of 1.3%–3.9%, which can meet the requirements of accurate and rapid determination of La and Ce in CMSX-4 nickel-based superalloy. © 2023, Youke Publishing Co.,Ltd. All rights reserved.     

电感耦合等离子体质谱(ICP-MS)法结合化学计量学分析比较6种松针中无机元素的含量

摘 要 为研究甘肃地区松针中无机元素的含量,探究不同品种松针中无机元素的差异,采用HNO3(65%)对松针样品进行微波消解,电感耦合等离子体质谱(ICP-MS)法测定甘肃两地区6种松针中28种无机元素的含量,结合主成分分析以及偏最小二乘判别分析对松针地区差异进行判别;结果显示松针中无机元素含量丰富,其中Na、Mg、Al、K、Ca、Fe、Zn、Mn、Sr等元素在不同品种松针中均有较高含量,主成分分析结果显示共有7个主成分,累积贡献率达到92.58%,偏最小二乘判别分析显示两地区6种松针在地区上可被明显分开,其中Mg、Fe、Zn、Mn、Sr、K 6种元素为造成地区差异的主要元素。实验结果表明松针中元素种类丰富,人体必需微量元素含量较高,且不同地区松针在地区上具有一定的一致性和特异性。     

酸溶-电感耦合等离子体发射光谱法测定白云石和菱镁石中主次元素

利用电感耦合等离子体原子发射光谱仪( ICP-AES)建立白云石和菱镁石中铝、钙、铁、镁、锰、磷、硅、锶的测定方法。研究了酸体系、温度及消解方式对试样消解的影响,结果表明,使用5 mL盐酸和硝酸混合酸(1：3)-0.75 mL氢氟酸-5 mL水以密闭消解的方式在150 ℃下消解白云石和菱镁石30min,并以2mL饱和硼酸络合多余的氢氟酸,可以得到澄清消解液。通过白云石和菱镁石中铝、钙、铁、镁、锰、磷、硅、锶的谱线干扰情况,选择Al 308.215 nm、Ca 318.127 nm、Fe 261.187 nm、Mg 277.983 nm、Mn 257.61 nm、P 213.618 nm、Si 251.611 nm、Sr 421.552 nm作为分析线,各元素的校准曲线在线性范围内线性关系良好,相关系数均不小于0.999。按照实验方法测定白云石和菱镁石标准物质,各元素结果的相对标准偏差 (RSD, n=6)为0.89~3.19%,测定值与认定值无显著性差异。本方法有效解决了白云石和菱镁石快速有效溶解及准确测定问题。